Fluke 719PRO Electric Pressure Calibrator with Backlit Display

Category: Calibrators

The Fluke 719PRO provides an innovative, built-in electric pump and pressure calibration that is accurate and easy to use. Now you can calibrate and test pressure devices quickly and easily with one hand, saving you valuable time. The Fluke 719Pro's programmable pump limit settings to eliminate over-pressurization, and to set ‘pump to’ pressure values. The unique cleanout port design reduces pump failures, and makes the Fluke 719Pro easy to clean without repair. The compact, lightweight form, combined with one-handed use, makes this pressure calibrator the ideal tool for busy process professionals. The Fluke 719 Pro adds a backlit display and adds precision temperature measurement with the use of a RTD probe, making the Fluke 719 Pro a very veritile Calibrator.

Pressure Measurement Specifications
Range 719PRO-30G -12 to 30 PSI /-0.8 to 2 bar
719PRO-150G -12 to 150 PSI /-0.8 to 10 bar
719PRO-300G -12 to 300 PSI / -0.8 to 20 bar
Resolution 0.01 PSI, 0.001 bar
Accuracy (1 year) ±0.025 % of full scale, 6 months ± 0.035 % of full scale, 1 year Dry Air and non-corrosive gas only
Temperature effect (all ranges) Add ± 0.002 % F.S./°C for temps outside of 15°C to 35°C
No effect on accuracy on all functions from 15°C to 35°C
Function Range Resolution Accuracy (1 year)  
mA dc (simulation and measurement) 0-24 mA dc 0.001 mA ±0.015 % of reading
±2 counts
1000 ohm maximum load in mA source, 26 V dc maximum voltage in mA simulate
Volts dc (measurement only) 30 V dc .001 V ±0.015 % of reading
±2 counts
No AC voltage measurement, do not exceed 30 V dc
Temperature (measurement only, Pt100 RTD) -50 to 150°C (-50°F to 302°F) 0.01°C
Temperature ± 0.1°C (0.2°F) ±0.25°C (±0.45°F) combined uncertainty when using 720 RTD probe (optional accessory)
Loop power supply 24 V dc N/A 24 mA at 24 V
Temperature effect (all functions)   Add ± 0.002 % F.S./°C for temps outside of 15°C to 35°C No effect on accuracy on all functions from 15°C to 35°C
Environmental Specifications
Operating temperature -10 °C to +50 °C
Storage temperature (with batteries) Per battery manufacturer's specification within storage specification below
Storage temperature (without batteries) -20 °C to +60 °C
Power Requirements
Battery Eight (8) standard Alkaline AA batteries
Battery life 300 pump cycles to 150 PSI minimum; 1000 pump cycles to 30 PSI; 100 pump cycles to 300 PSI minimum
Physical Specifications
Dimensions (HxWxD) 9.5 in x 4.4 in x 2.8 in (24.13 cm x 11.18 cm x 7 cm)
Weight With holster 1.2 kg (2.5 lb)
Pressure 1/8 inch female NPT
Electrical Standard banana jacks
RTD 4 pin miniature circular
External module 6 pin miniature circular
psi, bar, mbar, kPa, kgcm2, cmH2O@4°C, cmH2O@20°C, mH2O@4°C, mH2O@20°C, inH2O@4°C, inH2O@20°C, inH2O@60°F, mmHg@0°C, inHg@0°C, ftH2O@4°C, ftH2O@20°C, ftH2O@60°F


Ask about this product